经典款华瑞四合一气体检测仪PGM-2400以超高的性价比,简单实用,以及设置简便等优点,公司具有良好的市场信誉,专业的销售和技术服务团队,凭着经营华瑞气体检测仪QRAEII多年经验,安全使用,无后顾之忧。
华瑞四合一气体检测仪可同时显示4种气体或1种气体的数值指标量,当现场某种待检气体的指标处于报警范围时,PGM-2400会自动进行一系列报警动作,闪灯、振动、发声。QRAEII具备1个LEL传感器检测可燃气、2个EC传感器检测有毒气体、1个SPE传感器检测氧气。QRAEII传感器名称(多四个)、实时检测值,所有检测的高和低值、TWA/STEL值(氧气和可燃气除外)、电池电压、仪器运行时间,数据采集开/关状态。
华瑞四合一气体检测仪QRAEII是一个可检测多种有毒有害气体的便携式四合一检测仪,可同时对可燃气、氧气和有毒气体进行检测。
QRAEII兼容扩散和泵吸两种工作方式,适合不同应用场所。
华瑞四合一气体检测仪体积小巧,操作方便,内置中文菜单,更适合中国用户使用。
PGM-2400屏幕人性化翻转显示设计,方便观察。
华瑞气体检测仪QRAEII可同时安装几种传感器进行检测:
1)华瑞四合一气体检测仪QRAEII催化燃烧传感器检测可燃性气体
2)PGM-2400电化学传感器检测硫化氢、一氧化碳等有毒气体
3)QRAEII固体电解质(SPE)传感器检测氧气,比传统的电化学传感器寿命更长、性能更稳定。
The QRAEII is a full-featured, compact, one- to four-sensor gas detector for oxygen, combustibles, hydrogen sulfide, or carbon monoxide. Key features include easy-to-change battery pack, a water-resistant case and a new state-of-the-art O2 sensor.
Key Features
• Patented SPE O2
™ Oxygen sensor features:
– Lead-free design that complies with
RoHS directive
– Extended life resulting in low cost of ownership
– Leak-free design, minimizing downtime
• Best EMI/RFI immunity technology, minimizing
electromagnetic and radio interference
• Easy access to pump, sensors, filter and battery
compartment
• IP-65 water- and dust-resistant case
• Strong, protective, concussion-proof design
• Plug-in sensors: oxygen, combustibles,
hydrogen sulfide, or carbon monoxide
• Intuitive simple-to-operate two-button user
interface
• Multi-language support
• One-button calibration with auto-zero capability
美国华瑞气体性能参数:
PGM-2400尺寸 |
12.6×7×3.8 cm |
重量 |
扩散式250g,泵吸式350g(含电池) |
抗电磁辐射 |
EMI/RF等级:EMC Directive 89/336/EEC |
|
温度 |
-20℃~ 50℃ |
|
湿度 |
0% ~ 95%相对湿度(无冷凝) |
|
显示及操作 |
显示屏 |
4行图形液晶显示器、带自动背光 |
显示语言 |
中文/英语+符号 |
|
rae华瑞气体检测仪
显示内容 |
传感器名称(多四个)、实时检测值,所有检测的高和低值、TWA/STEL值(氧气和可燃气除外)、电池电压、仪器运行时间,数据采集开/关状态 |
|
按键 |
2个操作键 |
|
报警参数 |
报警方式 |
95dB@30cm蜂鸣器、LED闪烁、振动 |
报警信号 |
高/低浓度报警、TWA/STEL报警(氧气和可燃气除外)、电池电量不足报警、传感器故障报警、泵阻塞报警(泵吸模式) |
Detector S pecifications
Size Diffusion: 5" L x 2.8" W x 1.5" H (12.5cm x 7.2cm x 3.8cm)
Pump: 5" L x 2.8" W x 2" H (12.5cm x 7.2cm x 5.0cm)
Weight Diffusion: 9 oz (250 g)
Pump: 12 oz (350 g)
Sensors • Catalytic bead for combustibles
• Oxygen: SPE O2™ (non-consumable Solid Polymer Electrolyte technology)
• Toxic: electrochemical for H2S or CO
Battery Interchangeable Lithium-ion or alkaline battery packs
Operating Period Diffusion: Up to 14 hours continuous operation with Lithium-ion battery, up to
10 hours with alkaline battery (typical, without alarm)
Pump: Up to 10 hours with Lithium-ion battery, up to 8 hours with alkaline battery
Display Graphic 4 lines, with LED automatic back light in dim light or alarm condition
Keypad Two-button operation
Direct Readout • Instant reading from up to four sensors
• Oxygen as percentage by volume
• Combustible gas as percentage of lower explosive limit (LEL), scalable
using correction factors
• Toxic gases in parts per million
• High and low values for all gases
• Battery and shutdown voltage
• Date, time, elapsed time, temperature
Alarms • 95dB buzzer (at 30 cm, typical), vibration alarm, and flashing red LED
• High: 3 beeps, vibration and flashes per second
• Low: 2 beeps, vibration and flashes per second
• STEL and TWA: 1 beep, vibration and flash per second
• Alarms: latching with manual override or automatic reset
• Additional diagnostic alarm and display message for low battery
• Pump stall alarm (QRAE II Pump only)
华瑞气体检测仪PGM-2400产品结构:
传感器参数 |
传感器 |
检测范围(%) |
分辨率(%) |
响应时间(T90秒) |
检测误差(标定点) |
O2 |
0-30 |
0.1 |
15 |
<±3% |
|
LEL |
0-100 |
1 |
15 |
||
传感器 |
检测范围(ppm) |
分辨率(ppm) |
响应时间(T90秒) |
检测误差(标定点) |
|
CO |
0-1000 |
1 |
25 |
<±3% |
|
H2S |
0-100 |
0.1 |
30 |
||
H2S* |
0-1000 |
1 |
30 |
||
SO2* |
0-20 |
0.1 |
15 |
Gas Monitor Range Resolution
Oxygen 0 to 30.0% 0.1%
Combustible 0 to 100% LEL 1% LEL
Carbon Monoxide 0 to 1000 ppm 1 ppm
Hydrogen Sulfide 0 to 100 ppm 0.1 ppm